Fly the Airplane, First and Always

Early in training, pilots are taught to fly the airplane first, last, and always. This idea is formalized in the “aviate-navigate-communicate” mantra presented during the very first flight lesson, if not before.

In a “well, DUH” sort of way, it intuitively makes sense that a pilot’s top priority, both in normal operations and in not-so-normal times, is to fly the airplane before tending to any other task. However, those of us whose four-part Myers-Briggs Type Indicator includes an “S” for sensor (versus an “N” for intuitive) have a strong need to know what that means in very practical and very specific terms.

I eventually came to understand that it’s about bringing your “A game.” To aviate — to fly the airplane — means using the flight controls and flight instruments to direct and control the airplane’s attitude, airspeed, and altitude. So let’s get straight on the As.

Attitude

The term attitude refers to the aircraft’s orientation with respect to the horizon.

In flight under visual flight rules (VFR), weather conditions are good enough for the pilot to see and use the natural horizon as a reference point for the what pilots call the four fundamentals: straight and level flight, climbs, turns, and descents.

To learn what the right attitude looks like for various phases of flight, look outside. Pay close attention to how the airplane’s nose and wingtips look relative to the horizon in each of the four fundamental maneuvers. Take a mental snapshot and, for later study, use your smartphone.

If the weather is not good enough to see outside, the flight occurs in instrument meteorological conditions (IMC), using instrument flight rules (IFR). In this case, the pilot uses an instrument called the attitude indicator, or “artificial horizon,” to establish and maintain the right attitude for the phase of flight.

It takes specific training and lots of practice for a pilot to be proficient in IFR flying. Chances are good that a non-pilot flying companion will never need to take over the flying at all — much less in IMC. If you want to “get the picture,” though, first master outside references for attitude flying, and then start comparing them to how they are depicted on the attitude indicator.

Airspeed

Before we talk about airspeed, I need to briefly introduce another “A” term: aerodynamics. Aerodynamics deals the motion of air, which is a gas, and the forces that act on solid objects, like airplanes, that move through it.

To put it (very) simply, an airplane flies because air moving over the wings generates a force called lift.

Airspeed is the measure of how fast that air is moving. An airplane needs a certain minimum airspeed to take off and fly. You might hear pilots talk about “true” airspeed and “calibrated” airspeed, but the one that matters for this discussion is “indicated” airspeed (IAS), as shown on the airspeed indicator (ASI).

The values for the necessary IAS differ from one airplane to another. A flying companion can cer­tainly memorize numerical airspeed values for the various phases of flight, but it’s a lot easier to use the color coding on the ASI.

As with attitude flying, start paying attention to the placement of the ASI pointer during various phases of flight. In general, though, pilots use an airspeed in the white arc for takeoff/climb and descent/landing. An airspeed in the green arc is used for normal cruise flying. Yellow is for smooth air only, and the red line is the “never exceed” speed. Don’t go there!

Altitude

As with airspeed, aviation uses several kinds of altitude. Most people think first about height above ground level (AGL). AGL is impor­tant, but the altim­eter displays the altitude that really counts for flying: height above mean sea level (MSL).

The grid on aeronautical charts shows the MSL value for the minimum safe altitude (MSA) in each square, or block of airspace. In the unlikely event that a flying companion needs to take over from an incapacitated pilot, the trick is to use the altimeter to verify that you are at or above the MSA for the airspace you occupy. So part of your A game is knowing how to read the altimeter.

In newer airplanes with “glass cockpit” instru­ments, the altimeter is easy to read because it is a moving “tape” with numbers beside it. In older airplanes with “round dial” instruments, you might first think the altimeter is a distorted clock from a Salvador Dali painting. You will see numbers from 0 to 9, and three pointers that indicate height in hundreds, thousands, and tens of thousands. It takes a bit of practice to learn to read this kind of altimeter quickly and accurately, but your pilot can help — and there are lots of YouTube videos that show it in action.

Getting Straight on the As

You need not be a pilot to benefit from the resources that the FAA and the aviation training community have on these topics, so check them out. Aim to get straight on the “A”s of flying the airplane, so your A game will be ready if ever you need to fly the airplane.  (FAA Safety Briefing MarApr 2018)